Our production layouts are customized according to product requirements. With our skilled engineers we provide cost effective products with 100% quality and Zero risk. Every manufacturing stages are getting monitored through computerized software (Lavogne). Supervisors and production engineers can monitor the information remotely stage by stage and display the process at the boards and their laptop computers.

Open Wire Harnesses:

SEFEE manufactures a variety of open wire harnesses for customers where fast, on-site serviceability is required. Another benefit of open wire harness style can be that the weight of the finished assemblies are significantly lower.

Encapsulated Harnesses:

SEFEE manufactures a variety of encapsulated harnesses, where complete environmental protection, coupled with Nuclear Biological Chemical (NBC) wash-down capabilities are required.

Convoluted / PVC Tubing:

SEFEE manufactures “closed bundle” harnesses for use in harsh and rugged environments. The use of convoluted & PVC tubing provides environmental protection and abrasion protection. Many of our products are IP rated to prevent water ingress. Additionally the addition of tubing can add to the aesthetic appeal of the assembled harnesses.

Braided Harnesses:

SEFEE manufactures a variety of braided harnesses, where extra protection is required, be it high temperature or high wear resistance. Braided harnesses are also preferred as LRU’s (Line Replaceable Units) type of harnesses, these decrease the down time of aircraft in AOG scenarios. We are capable of braiding a variety of materials, including Nomex, Nylon / Engineered Yarns, PEEK and Stainless Steel.

Box and Panel Assembly:

Whether it is new build or repair and overhaul, SEFEE have vast experience in bring together Electromechanical Sub-Assemblies and Systems. SEFEE Assembles Aerospace, Commercial, Military and Marine Boxes and Panel Assemblies.

Exceptional Processes.

Laser Marking:

UV laser marking provides a simple, convenient, environmentally friendly, cost effective means of marking and identifying wires and jacketed cables. SEFEE has capacities to print the cables irrespective of gauges and insulation materials

Ident Printing:

SEFEE has the capability to print a variety idents for a range of heat shrink products including D-SCE, HT-SCE and TMS-SCE ranges using our Thermal Transfer Printing capabilities.

Coaxial Connectors:

SEFEE has massive experience & have numerous experts to make highly complicated coaxial connectors and full harness, SEFEE have Automated Equipments & Hand tools to perform full assembly and dielectric test.

Twinax Connectors:

SEFEE offers fully assembled twinax connectors provides superior performance in high speed matched impedance data-on-demand applications. The signal to signal and signal to shield characteristic impedance is maintained throughout the connector pair

Quadrax Connectors:

SEFEE offers a complete line of differential Quadrax connectors assembly, Quadrax connector comprises four inner signal contacts that are insulated from each other and encased in an outer shell. Connectors that provides the high performance, ease of use, termination requirements, reliability, and serviceability

Shield Termination-Connector crimp:

SEFEE offers a process where the backshells utilize replacable bands for full 360° shield/screen termination. Banding and crimp ring backshells provide an economical approach to terminating overall cable and harness shields/screens.

MBBN3315 Protection:

SEFEE uses this protection as protective wrap on the backsheells or chimeny’s where the molded parts cannot be used this protection provides greater holding support and avoid moisture particles not inside the backshells.

Backshell Locking with wire:

The locking by wire process involves using a specifically sized diameter of wire which is inserted through a predrilled hole in a bolt head or nut. will then identify the thread handling (either right or left) and lock the components by twisting and wrapping the wire as appropriate, SEFEE has necessary tooling’s and equipment’s with highly skilled individuals to perform this operation.


Soldering is performed by SEFEE as an alternative to manual crimping should this be required. Our individuals are well versed in soldering they took guidance under certified IPC-WHMA-A-620 experts.


Design and
Manufacturing Units


Years of


Countries where our
products are used